Aeration

1 to 2 (from a total of 2)
The Manganese air generation kit is a pressure-based air generation kit based on the Air Lift 3P, with 5 user-defined pressure settings and individual wheel control. The wired control panel of the 3P shows all four bellows pressures as well as the tank pressure in a legible format without a lot of frills. The controller uses a colored, backlit screen and has rotatable operating elements, which also enable the operating unit to be mounted horizontally.

Using the Air Lift mobile app for iOS and Android, it is possible to put the vehicle into so-called "Show Mode" and control the entire chassis remotely using the built-in Bluetooth connection, even when the vehicle is switched off. No additional hardware is required for this function and is integrated in every 3P or 3H based system! Future system updates for the control block can also be made directly via this app.

Features and special features:

    5 user-defined storable pressure levels (can be upgraded to height sensors)
    Manual single wheel control for individual control of the system
    Digital pressure display with color screen and physical control units
    Rotatable control unit for horizontal installation
    Mobile app (no additional hardware required)
    System updates via the aforementioned mobile app
    Combined valve unit with control unit
    Rise on Start function

The Titan air generation kit is a height sensor-based air generation kit based on the Air Lift 3H, with 5 user-defined pressure settings and individual wheel control. The wired control unit of the 3H shows all four bellows pressures as well as the tank pressure in a legible format without a lot of frills. The controller uses a colored, backlit screen and has rotatable operating elements, which also enable the operating unit to be mounted horizontally.

Using the Air Lift mobile app for iOS and Android, it is possible to put the vehicle into so-called "Show Mode" and control the entire chassis remotely using the built-in Bluetooth connection, even when the vehicle is switched off. No additional hardware is required for this function and is integrated in every 3P or 3H based system! Future system updates for the control block can also be made directly via this app.

Features and special features:

    5 user-defined storable pressure levels
    Manual single wheel control for individual control of the system
    Digital pressure display with color screen and physical control units
    Rotatable control unit for horizontal installation
    Mobile app (no additional hardware required)
    System updates via the aforementioned mobile app
    Combined valve unit with control unit
    Rise on Start function